12
When this command is sent in playback pause mode, MDS starts
playback again from the point.
When this command is sent in recording pause mode, MDS starts
recording.
Example of transmission packet:
Start playback.
7EH, 07H, 05H, 47H, 02H, 01H, FFH
6.5 STOP
Function: To stop playback
Data length: 2 bytes
Data: 02H, 02H
Details of function: This command stops playback.
When this command is sent in playback mode, MDS stops play-
back.
When playback is started again after the above, MDS starts play-
back from top of a disc.
To start playback again from the previous stopping point, “PAUSE ON/
OFF” command must be used instead of this “STOP” command.
Example of transmission packet:
Stop playback.
7EH, 07H, 05H, 47H, 02H, 02H, FFH
6.6 PAUSE ON/OFF
Function: To pause playback/ To cancel pause
Data length: 2 bytes
Data: 02H, 03H
Details of function: This command has the same function as the PAUSE key in the main
unit or the remote control.
In short, this command changes playback mode to playback pause
mode, and playback pause mode to playback mode.
To Next Page
Loading...
