Getting Started
8
GB
4 Repeat Step 3 to enter the month, day, year, hour,
and minute.
USA and Canadian models
European model
z For precise time and date stamping of recordings
Reset the time at least once a week.
Note
If the AC power cord is disconnected for a long time, the
memorized clock settings will disappear and “Initialize” will
flash in the display the next time you plug in and turn on the
deck. If this happens, reset the clock.
Displaying the current date and time Z
Press DATE PRESENT.
Each press of the button changes the display as
follows:
n Current display n Date n Time
Changing the clock setting(s)
1
Do steps 1 and 2 above.
2 Press AMS or 0/) repeatedly until the
setting you want to change flashes.
3 Turn AMS to change the setting, then press AMS
or YES.
4 To complete the setting, press AMS or 0/)
repeatedly until all items stop flashing.
To Next Page
Loading...
Need help?
General
