Sony MEX-BT3000 - Sound Settings; Changing Sound Settings; Adjusting Sound Characteristics

20
Note
When disposing of this unit, preset numbers
should be deleted with “BT INIT.”
Sound Settings and
Setup Menu
Changing the sound
settings
Adjusting the sound
characteristics
1 During reception/playback, press the
select button.
2 Rotate the control dial until the desired
menu item appears, then press it.
3 Rotate the control dial to select the
setting, then press it.
4 Press (BACK).
The following items can be set:
EQ3 PRESET (page 21)
EQ3 LOW*
1
(page 21)
EQ3 MID*
1
(page 21)
EQ3 HIGH*
1
(page 21)
BALANCE
Adjusts the sound balance: “RIGHT-15”
– “CENTER” – “LEFT-15.”
FADER
Adjusts the relative level: “FRONT-15” –
“CENTER” – “REAR-15.”
SW LEVEL (Subwoofer Level)*
2
Adjusts the subwoofer volume level:
“+10 dB” – “0 dB” – “–10 dB.”
(“ATT” is displayed at the lowest
setting.)