19
With the card remote commander
Use (SRC) instead of (SOURCE/OFF).
To stop playback
Press (SOURCE/OFF) for 1 second.
With the card remote commander, press (OFF).
To disconnect the USB device
Stop playback, then disconnect.
Do not disconnect during playback, as data in the USB device may be damaged.
About the Quick-BrowZer function
The Quick-BrowZer function allows you to easily search for an item in a USB device containing many
albums/tracks. For details, see “Listing up tracks/images/video files — Quick-BrowZer” on page 32.
About the ZAPPIN function
The ZAPPIN function allows you to easily search for a track, for example, in shuffle or shuffle repeat
mode. For details, see “Searching a track by listening to track passages — ZAPPIN™” on page 33.
Notes
• Do not use USB devices so large or heavy that they may fall down due to vibration, or cause a loose connection.
• Do not detach the front panel during playback of the USB device, otherwise the data may be damaged.
• This unit cannot recognize USB devices via a USB hub.
• If a USB device contains multiple file types, only the selected file type (audio/video/image) can be played. To play
DivX/MPEG-4 video files or JPEG image files of such a device, press during playback, select the desired file
type (video/image) to list up, then select the desired file (page 32).
1
Connect the USB device to the USB
connector.
Playback starts automatically.
If a USB device is already connected, to start playback,
press (SOURCE/OFF) repeatedly until “USB” appears.
OFF
SRC
SOURCE
/
OFF
To Next Page
Loading...
Need help?
General
