Sony MHC-EC59 - Using the timers

MHC-EC59.GB.4-188-893-11(1)
23
GB
Operations
Notes on the display information
 Characters that cannot be displayed appear
as “_”.
 e following are not displayed:
 total playing time for an MP3 disc and
USB device
 remaining playing time for a le
 e following are not displayed correctly:
 elapsed playing time of an MP3 le
encoded using a VBR (variable bit rate)
 folder and le names that do not follow
either the ISO9660 Level 1, Level 2 or
Joliet in the expansion format
 e following are displayed:
 remaining playing time for a track
 ID3 tag information for MP3 les when
ID3 version 1 and version 2 tags are used
(ID3 version 2 tag information display
has priority when both ID3 version 1 and
version 2 tags are used for a single MP3
le)
 up to 15 characters of ID3 tag, WMA tag
and AAC tag information using uppercase
letters (A to Z), numbers (0 to 9), and
symbols (˝ $ % ’ ( ) * + , – . / < = > @ [ \ ] _
` { | } ! ? ^ ˜)
Using the timers
e system oers two timer functions. If
you use both timers, the Sleep Timer has
priority.
Use buttons on the remote to use the
timer functions.
Sleep Timer:
You can fall asleep to music. is
function works even if the clock is not
set.
Press SLEEP repeatedly.
If you select “AUTO,” the system
automatically turns o aer the current
disc or USB device stops, or within 100
minutes.
Play Timer:
You can wake up to CD, FM/AM
reception or USB device at a preset time.
Make sure you have set the clock.
1 Prepare the sound source.
Prepare the sound source, and then
press VOLUME +/ to adjust the
volume.
To start from a specic CD track or
audio le, create your own program
(page 20).
2 Select the timer set mode.
Press CLOCK/TIMER SET.
Continued
