Sony MHC-RV20 User Manual

16
GB
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the radio frequency of the desired stations.
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press and hold TUNING –/+ (or –m or
M+ on the unit) until the frequency
indication starts to change, then
release it.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for an FM
stereo program) appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 through 6 of
“Manual tuning preset” (page 16).
3 Press TUNER MEMORY.
A preset number appears.
4 Press PRESET –/+ (or . or > on
the unit) repeatedly to select the
desired preset number.
5 Press ENTER.
“COMPLETE” appears.
6 Repeat steps 1 through 5 to store other
stations.
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press TUNING –/+ (or –m or M+ on
the unit) repeatedly to tune in the
desired station.
3 Press TUNER MEMORY.
A preset number appears.
4 Press PRESET –/+ (or . or > on
the unit) repeatedly to select the
desired preset number.
5 Press ENTER.
“COMPLETE” appears.
6 Repeat steps 1 through 5 to store other
stations.
Tuner
Presetting radio stations
Preset number

Sony MHC-RV20 Specifications

General

Brand	Sony
Model	MHC-RV20
Category	Stereo System
Language	English