Sony MHC-RV20 - Enhancing Video Game Sound; Game Sync; Mixing Video Game Sound; Game Mixing

22
GB
Press SURROUND.
Each time you press the button, the display
changes as follows:
SURROUND ON (SURR)
Y
SURROUND OFF
You need to connect a video game machine (see
“Hooking up optional components” on page 29).
Press GAME.
Tips
• In the standby mode, the system automatically turns
on.
• The GAME EQ is automatically selected.
• These operations cannot be performed in Power
Saving Mode.
1 Select the desired sound source.
2 Press GAME MIXING on the unit.
Each time you press the button, the display
changes cyclically as follows:
MIXING LOW t MIXING MID t
MIXING HIGH t MIXING OFF
Notes
• If you start recording while Game Mixing is
activated, Game Mixing is canceled. To record the
mixed sound, press GAME MIXING on the unit after
step 3 of “Recording on a tape manually” on page 20,
and then press REC PAUSE/START on the unit to
start the recording.
• This system outputs the video signal from the GAME
INPUT jack while GAME MIXING is activated.
Tips
• The GAME MIXING indicator lights up while Game
Mixing is activated.
• Once Game Mixing is activated, it will remain active
while the power is on even if the sound source is
changed.
Selecting the surround
effect
Enhancing video game
sound
— Game Sync
Mixing video game sound
with other sound source
— Game Mixing