Sony MHC-RV20 - System Setup and Initial Use; Hooking Up the System

6
GB
Perform the following procedures 1 to 6 to hook up your system using the supplied cords and
accessories.
1 Connect the speakers.
Connect the right and left speaker cords to
the SPEAKER terminals as shown below.
2 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Getting Started
Hooking up the system
AM loop antenna
Front speaker (right) Front speaker (left)
FM lead antenna
R
L
+
–
Black/Stripe (#)
Red/Solid (3)
Insert only the stripped portion
Extend the FM lead antenna horizontally
AM loop antenna