Sound Adjustment
25
GB
You can adjust the sound by raising or lowering
the levels of specific frequency ranges, then
store up to three personal files (P FILE) in the
memory.
Before operation, first select the audio emphasis
you want for your basic sound.
Use buttons on the unit for the operation.
1 Press EQ BAND repeatedly to select a
frequency band, then turn – EQ + to
adjust the level.
2 Press and hold P FILE.
A personal file number appears.
3 Press P FILE repeatedly to select
P FILE 1 – 3 you want to store the
equalizer setting.
4 Press ENTER.
“COMPLETE” appears.
This setting is automatically stored as the
personal file you selected in step 3.
Other operations
Press SURROUND on the unit.
Each time you press the button, the display
changes as follows:
SURROUND ON (SURR)
Y
SURROUND OFF (off)
You need to connect a video game machine (see
“Hooking up optional components” on page 34).
Press GAME on the unit.
Tips
• In the standby mode, the system automatically turns
on.
• The GAME EQ is automatically selected (page 24).
• These operations cannot be performed in Power
Saving Mode (page 30).
Adjusting the graphic
equalizer and storing
To Press
Call up a
personal file
P FILE repeatedly to select the
desired personal file number.
Cancel a personal
file
EFFECT ON/OFF repeatedly
until “EFFECT OFF” appears.
Frequency levelFrequency band
Selecting the surround
effect
Enhancing video game
sound
— Game Sync
To Next Page
Loading...
Need help?
General
