Help Guide
Home Audio System
MHC-V42D
Pairing and connecting with BLUETOOTH devices
When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device.
Before operating the system, be sure to do the following:
Place the BLUETOOTH device within 1 m from the system.
Stop playback on the BLUETOOTH device.
Turn down the volume of the BLUETOOTH device and system to avoid any sudden loud sound output from the
system. Depending on the BLUETOOTH device, the volume of the device may be synchronized with the system.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
Hint
For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device.
Note
For Apple iOS devices, the system is compatible with iOS 10.0 or later.
Select the BLUETOOTH function.
Hint
When there is no pairing information on the system (for example, when you use the BLUETOOTH function for the first time
after purchase), [PAIRING] flashes on the display and the system enters the pairing mode. Proceed to step
.
When you turn on the system, the system tries to make a BLUETOOTH connection with the last connected BLUETOOTH
device. If the device is nearby and its BLUETOOTH function is on, the BLUETOOTH connection is established
automatically and the BLUETOOTH device name appears on the display. In this case, turn off the BLUETOOTH function or
turn off the power of the currently connected BLUETOOTH device.
1
Press
(power) to turn on the system.1.
Press FUNCTION repeatedly until [BLUETOOTH] appears on the display.2.
Hold down BLUETOOTH/
PAIRING for more than 3 seconds until [PAIRING] appears on the display.
2
Perform the pairing procedure on the BLUETOOTH device to detect the system.
When a list of detected devices appears on the display of the BLUETOOTH device, select [MHC-V42D].
If a passkey
*
is required on the display of the BLUETOOTH device, enter [0000].
3
The passkey may also be called a “passcode,” “PIN code,” “PIN number” or “password.”
*
Make the BLUETOOTH connection from the BLUETOOTH device.
When the BLUETOOTH connection is established, the BLUETOOTH device name appears on the display.
If the BLUETOOTH connection is not established, repeat from step
.
4
To Next Page
Loading...
Need help?
General
Weight and Dimensions
