Help Guide
Home Audio System
MHC-V42D
Transferring music from a disc
You can transfer music from a disc (AUDIO CD or MP3 disc only) to a USB device connected to the
(USB) port
on the system.
The audio format of files transferred by this system is MP3.
Note on copyright-protected content
The transferred music is limited to private use only. Use of the music beyond this limit requires permission of
the copyright holders.
Note
Do not remove the USB device during transfer operation. Doing so may corrupt the data on the USB device or damage
the USB device itself.
MP3 files are transferred with the same bit rate as the original files.
When transferring from AUDIO CD, you may select the bit rate before transferring.
USB transfer operation is prohibited when the disc tray is opened.
Connect a transferable USB device to the (USB) port.
Note
You can use a USB adaptor (not supplied) to connect the USB device to the system if the USB device cannot be
plugged into the
(USB) port.
1
Press OPTIONS.
The options menu appears on the display.
2
Press
/ repeatedly to select [BIT RATE], then press (enter).
3
Press / repeatedly to select the bit rate you want, then press (enter).
[128 KBPS]: Encoded MP3 files have smaller file size and lower audio quality.
[256 KBPS]: Encoded MP3 files have bigger file size but higher audio quality.
Press OPTIONS to exit the menu.
4
Press FUNCTION repeatedly to select [DVD/CD], then load a disc.
5
Prepare the sound source.
Synchronized Transfer: Transfer all tracks or MP3 files from a disc to USB device.
If the system starts playback automatically, press
(stop) twice to stop the playback fully.
When playback is stopped, press PLAY MODE repeatedly to select the play mode you want.
6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
