Help Guide
Home Audio System
MHC-V42D
Auto Standby function
The system enters standby mode automatically in about 15 minutes when there is no operation or audio signal output. At
the time of purchase, the Auto Standby function is set to on.
Note
The Auto Standby function does not work in the following cases:
when the Sleep Timer is activated.
when an external device is connected to the MIC1 jack or the MIC2/GUITAR jack.
when the system is a Party Guest for the Wireless Party Chain function or the Guest system for the Speaker Add function.
To turn off/on the Auto Standby function
To exit the options menu
Press OPTIONS.
Hint
[AutoSTBY] flashes on the display about 2 minutes before the system enters standby mode.
4-748-035-41(1) Copyright 2019 Sony Corporation
Press OPTIONS.
The options menu appears on the display.
1.
Press
/ repeatedly to select [AutoSTBY], then press (enter).2.
Press
/ repeatedly to select [ON] or [OFF], then press (enter).3.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
