43
Adjusting the graphic
equalizer
You can adjust the sound by raising or
lowering the levels of specific frequency
ranges.
Before operation, first select the audio
emphasis you want for your basic sound.
1 Press EQ EDIT.
2 Press b/B to select the frequency
band, then press v/V to adjust the
level.
3 Press ENTER.
This setting is automatically stored as
USER FILE.
Tips
• If you want to select the previously adjusted
equalizer settings (USER FILE), press v (or
MULTI MENU v on the remote).
• To use b/B/v/V, see page 41.
?/1
(Power)
Frequency band Frequency level
3
1
v/V
b/B
To Next Page
