Sony MVS-3000A - Page 35

USO RESTRITO
Names and Functions of Parts of the Control Panel 35
Name
Description
BKGD
(background)
The next transition will change the
background.
KEY1 to KEY4
(DSK1 to DSK4
for the PGM/PST
bank)
• Press a button, turning it on, to make
the next transition insert or remove the
corresponding key (keys 1 to 4).
• If the key is currently not inserted, the
transition will insert it, and if the key is
currently inserted, the transition will
delete it.
For details about operations for keys 5 to
8, 1 “8-Keyer Operation” (p. 412).
KEY PRIOR
(priority)
The priority setting of the key after the
next transition is enabled.
ALL
This turns on a preselected set of the
[BKGD], [KEY1] to [KEY4], and [KEY
PRIOR] buttons. Make this setting in the
Setup menu.
Chapter
2
Names
and
Functions
of
Parts
6 PRIOR SET button
1 Next transition selection buttons
7 Key priority display
2 Transition type selection buttons
qd Independent key transition /
key snapshot control section
3 Transition execution section
5 TRANS PVW button
8 Independent key transition
execution section
4 Wipe direction selection buttons
Transition control block (ICP-
6520/6530 PGM/PST bank)
a Next transition selection buttons
These specify how the image will be changed as a result of
the next transition.
b Transition type selection buttons
These select the transition type ( 1 p. 63).
When multi-program mode is selected in the Setup menu,
two or more of the following buttons may light.
For details about the multi-program mode setting,
1 “Setting the Operation Mode” (p. 345).
You can also assign a function to these buttons that selects
whether or not the fader levers are used as keyframe
faders.
For details, 1 “Executing an effect manually” (p. 261).
For details about assignments for the transition type
selection buttons, 1 “Setting Transition Control Block
Button Assignments” (p. 327).