Sony MXP-210 - Page 4

e
Operate
the
unit
only
with
a
power
source
specified
in
the
“Specifications”
on
page
14.
e
The
nameplate
indicating
operating
voltage,
power
consumption,
etc.
is
located
on
the
bottom.
e
Should
any
solid
object
or
liquid
fall
into
the
cabinet,
unplug
the
unit
and
have
it
checked
by
qualified
personnel!
before
operating
it
any
further.
e
Unplug
the
unit
from
the
wall
outlet
if it
is
not
to
be
used
for
an
extended
period
of
time.
To
disconnect
the
cord,
pull
it
out
by
the
plug.
Never
pull
the
cord
itself.
sa}
Do
not
install
the
unit
near
a
heat
source
such
as
a
radiator
or
an
air
duct,
or
in
a
place
subject
to
direct
sunlight,
excessive
dust,
mechanical
vibration
or
shock.
For the customers in the United Kingdom
WARNING
THIS
APPARATUS
MUST
BE
EARTHED.
IMPORTANT
The
wires
in
this
mains
lead
are
coloured
in
accordance
with the following code:
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
As
the
colours
of
the
wires
in
the
mains
lead
of
this
apparatus
may
not
correspond
with
the
coloured
markings
identifying
the
terminals
in
your
plug
proceed
as follows:
The
wire
which
is
coloured
green-and-yellow
must
be
connected
to
the
terminal
in
the
plug
which
is
marked
by
the
letter
E
or
by
the
safety
earth
symbol
+
or
coloured
green or green-and-yellow.
The
wire
which
is
coloured
blue
must
be
connected
to
the
terminal
which
is
marked
with
the
letter
N
or
coloured
black.
The
wire
which
is
coloured
brown
must
be
connected
to
the
terminal
which
is
marked
with
the
letter
L
or
coloured
| red.
When the unit is not in use, turn the power off.
Clean the cabinet, pane! and controls with a dry soft cloth, or
a soft cloth lightly moistened with a mild detergent solution.
Do not use any type of solvent, such as alcohol or benzine,
which might damage the finish.
Save the original carton and associated packing material.
They will be useful should you have to transport or ship the
unit.
If you have any questions about this unit, contact your Sony
dealer.