Sony ODS-D380U Service Manual

3. Insert the working cartridge and the click the [SET] button.
The result is displayed.
SLIDER
CHECKING...OK
EXIT: MENU KEY
The following information is displayed when the check fails.
SLIDER
CHECKING...NG
MAIN BASE
EXIT: MENU KEY
Tip
A fails part is displayed as follows.
• Fails of optical block assembly 0/1: MAIN BASE
• Fails of optical block assembly 2/3: SUB BASE
• Fails of both optical block assemblies: BOTH
6-4-7. SPINDLE MOTOR AUTO TEST
This menu is used to check operation of the spindle motor.
Note
• Use a working cartridge to execute this menu.
• When executing this menu, place the unit in the right position.
- ODS-D280U: horizontal
- ODS-D280U: vertical (right side surface below)
ODS-D280U: Horizontal ODS-D280F: Vertical
If these sensors are checked with the unit placed improperly, the sensor check may fail.
ODS-D280U/ODS-D280F
6-14

Sony ODS-D380U Specifications

General

Brand	Sony
Model	ODS-D380U
Category	DVD Drive
Language	English