SETUP INSTRUCTIONS FOR PLAYSTATION 4
1. Ensure that Circuit Breakers 2B, 3A, and 3B have been turned on in the electrical panel.
2. Turn power on for the Television, Sound bar, and the PlayStation
3. Using the television remote, select source to HDMI 1
4. Press the PS button on the controller, and then select a user.
You can use up to 4 controllers at the same time. When you press the PS button, a
color is assigned to the user and the light bar lights up. The color that is assigned
to the user depends on the order in which the users press the PS button. The first
user is blue, the second is red, the third is green, and the fourth is pink.
5. If controllers are not automatically paired to the console follow the steps below
a. Perform device registration (pairing). Connect the PS4™ system and the
controller with a USB cable while the PS4™ system is turned on.
b. If you want to use 2 or more controllers, perform device registration for each
controller.
To Next Page
