Basic Operations
Basic Operations
11
EN
3 Press r to start recording.
(( is depressed automatically.)
Use these buttons for additional operations
Tips
• Adjusting the volume or
the audio emphasis (see
page 25) will not affect
the recording level.
• If the MW/LW
program makes a
whistling sound after
you've pressed r in step
3, press PLAY MODE•
MONO/ST ISS
repeatedly until the
noise is at a minimum.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
recording you want to
erase into the tape
compartment.
2 Turn on the power.
3 Press FUNCTION
repeatedly until
“TAPE” appears in
the display.
4 Press r.
p6
P
To Press
stop recording p6
pause recording P
Press the button again to
resume recording.
turn on/off the player OPERATE (or POWER, see
page 2)
OPERATE
(or POWER)
PLAY MODE
MONO/ST ISS
To Next Page
Loading...
Need help?
General
