To Next Page
M
Marc LoweAug 27, 2025
What does alarm message Voltage Low mean on Sony PMW-EX30?
- LLacey GrayAug 27, 2025
If the DC IN voltage has become low (stage 1), check the power supply.
What does alarm message Voltage Low mean on Sony PMW-EX30?
If the DC IN voltage has become low (stage 1), check the power supply.
Why does Sony PMW-EX30 Camcorder show alarm message Video Format Mismatch?
If the external signal input via the i.LINK connection cannot be recorded, as the Video Format setting is different from the signal format of the external input signal, change 'Video Format' of the OTHERS menu to match it to that of the external signal.
What to do if Sony Camcorder recording does not start?
If the SxS memory card is full, replace it with one having sufficient space. If the SxS memory card needs restoration, restore the memory card. If the video format of the input signal does not match with the video format set on this unit, set the unit to the same video format as that of the input signal. If the SxS memory card is write-protected, release the write protection, or replace the card with a non-protected SxS memory card.
How to display data on the monitor screen of my Sony DVR?
If data is not superimposed on the monitor screen of your Sony DVR, check the following: * The DISPLAY button is turned off. Turn the DISPLAY button on. * Superimposition is disabled. Set 'HDMI/CMPNT/SDI Out DISP' or 'CMPST/ S Out Display' of the VIDEO SET menu to 'On'.
Why is the image on the monitor screen too dark when using my Sony DVR?
If the image on the monitor screen is too dark, and you're using a video signal loop-through connection of multiple video monitors, the 75 ? termination switches for video input on monitors other than the loop-end monitor might be in the ON position. Set the 75 ? termination switches to OFF on all monitors other than the loop-end monitor.
What does 'Media Reached Rewriting Limit Change Media (A) a)' mean on my Sony DVR?
The message 'Media Reached Rewriting Limit Change Media (A) a)' on your Sony DVR means that recording/playback may not be performed properly if you continue to use the card. Make a backup copy and replace the card with another one as soon as possible.
What to do if there is an error in the connection order of the device for Sony Measuring Instruments?
If there is an error in the connection order of the device, turn off the power of the PMW-EX30 and reconnect it to the computer.
What to do if recording does not start on my Sony Recording Equipment?
If recording doesn't start when you press the REC button on your Sony Recording Equipment, it could be due to several reasons. First, check if the SxS memory card is write-protected and release the write protection. If the card is full, replace it with one having sufficient space. The card may also need restoration. Additionally, ensure that the video format of the input signal matches the video format set on the unit. You can set the unit to the same video format as that of the input signal.
Why won't my Sony DVR start recording when I press the REC button?
If your Sony DVR doesn't start recording, it could be due to several reasons: * The SxS memory card might be write-protected. In this case, release the write protection or use a non-protected card. * The SxS memory card might be full. Replace it with a card that has enough free space. * The SxS memory card may need restoration. * The video format of the input signal might not match the video format set on the unit. Ensure the unit is set to the same video format as the input signal.
How to fix an error in the upgrade tool for Sony Measuring Instruments?
To fix an error in the upgrade tool, reinstall a complete Version Up Tool file.
General
