What to do if device driver is not installed for Sony PMW-EX1 Camcorder?
If the device driver for your Sony Camcorder isn't installed, especially when using Windows XP, a [Hardware Installation] dialog box may appear. Click [Continue Anyway]. For Windows Vista or Windows 7, if a [Windows Security] dialog box appears, select [Install this driver software anyway]. Follow the on-screen instructions to complete the driver installation.
What to do if an upgrade error occurred with Sony PMW-EX1 Camcorder?
If you encounter an upgrade error with your Sony Camcorder, power off the PMW-EX1/EX3 and then repeat the upgrade procedure from the beginning.
What to do if a communication error occurred with Sony Camcorder?
If you see a communication error while upgrading your Sony Camcorder, turn off the power to the PMW-EX1/EX3. Then, reconnect it to your computer and try again.
What to do if an unexpected error occurred with Sony Camcorder?
If you encounter an unexpected error while upgrading your Sony Camcorder, power off the PMW-EX1/EX3 and repeat the entire procedure from the beginning.
What to do if there is an error in the connection order of the device for Sony PMW-EX1 Camcorder?
If the connection order of your Sony Camcorder device is incorrect, turn off the power to the PMW-EX1/EX3. Then, reconnect it to the computer.
What to do if an error occurred while confirming the connection of Sony PMW-EX1?
If an error occurs while confirming the connection of your Sony Camcorder, turn off the power of the PMW-EX1/EX3, and then reconnect it to the computer.
How to fix error in the upgrade tool for Sony PMW-EX1 Camcorder?
If the upgrade tool displays an error, reinstall a complete Version Up Tool file.
What to do if model name does not match the name of the connected device for Sony PMW-EX1 Camcorder?
If the model name doesn't match the connected device when upgrading your Sony Camcorder, reinstall the correct Version Up Tool file.
How to run the upgrade tool as a member of the Administrators group for Sony Camcorder?
If the upgrade tool prompts you to run as a member of the Administrators group, right-click on the Version Up Tool and select [Run as Administrator].
What to do if connected device is operating on battery for Sony Camcorder?
If your Sony Camcorder is operating on battery during an upgrade, turn off the power to the PMW-EX1/EX3 and connect it to an AC power source.
General| Resolution | 1920 x 1080 |
|---|---|
| Aperture | f/1.9 - f/16 |
| Optical Zoom | 14x |
| Focus | Auto/Manual |
| Recording Format | MPEG-2 Long GOP |
| Media Type | SxS Memory Card |
| Video Resolution | 1920 x 1080, 1280 x 720 |
| Sensor Type | 3 CMOS |
| Lens | Fujinon HD Zoom Lens |
| Focal Length | 5.8-81.2mm |
| Shutter Speed | 1/2 - 1/2000 sec |
| Gain | -3dB to +33dB |
| Frame Rate | 59.94i, 50i, 29.97p, 25p, 23.98p |
| Audio Format | PCM |
| Audio | 2-channel |
| Inputs/Outputs | HDMI, Component, Composite, USB |
| LCD Screen | 3.5-inch |
| Viewfinder | Color, 0.45" LCD |
| Battery | Lithium-Ion |
Details the items supplied with the camcorder, including accessories and documentation.
Introduces advanced recording capabilities, media, codec, and formats.
Highlights uncompressed audio, IT-friendly operation, and thumbnail access.
Details CMOS sensors, zoom lens, focus assistance, and special modes.
Details the 14x zoom lens and versatile focus-assistance functions for precise adjustments.
Introduces special modes like 23.98P, Slow & Quick Motion, Interval, and Frame Recording.
Covers shutter-angle settings, Picture Profile, Shot Transition, and operability features.
Explains how to read PDF manuals and install software from the CD-ROM.
Lists system requirements and guides for installing CD-ROM applications.
Provides instructions for removing application programs installed from the CD-ROM.
Identifies and labels the primary parts of the camcorder body, including the lens hood.
Identifies various ports (USB, SDI, A/V) and operational buttons (WHT BAL, SHUTTER).
Describes controls on the handle, upper panel, and lens control block.
Identifies controls on the grip, bottom, and IR remote commander.
Explains status information displayed in camera mode: battery, media, time, and i.LINK.
Lists and explains various on-screen indicators for settings like media, zoom, focus, and WB.
Guides on using the joystick or jog dial to operate the Direct menu for quick adjustments.
Covers using battery packs and AC power, including mounting, checking charge, and powering on/off.
Guides on setting the internal clock and time zone upon initial setup.
Details adjustments for LCD monitor (angle, backlight) and viewfinder (backlight, mode).
Covers activation, battery replacement, and operation of the IR remote commander.
Essential information on using, handling, and caring for SxS memory cards.
Step-by-step guide for inserting and removing SxS memory cards.
Explains how to switch cards and format SxS memory cards.
Checking recording time, replacing cards, and restoring SxS memory cards.
Introduces the optional PHU-60K unit and its connection to the camcorder.
Step-by-step guide for performing basic recording operations.
Guides on choosing the appropriate video format for recording and playback.
Explains how to select and use the built-in Neutral Density filters for exposure control.
Guides on adjusting white balance based on light source color temperature.
How to insert and activate on-screen markers like safety zone, center, and aspect markers.
How to insert zebra patterns to check luminance levels.
Guides on setting the video amplifier gain according to subject brightness.
Guides on changing shutter speed for accumulation time.
Guides on adjusting iris opening manually or automatically.
Guides on adjusting zoom in Manual or Power (Servo) modes.
Guides on selecting and adjusting focus modes: Full MF, MF, and AF.
How to reduce image blur caused by camera shake using Steady Shot.
Methods to reduce image flicker caused by lighting conditions.
How to set time data and describes timecode running modes.
Guides on setting timecode value, mode, format, and user bits.
Details on recording audio using built-in mics or external inputs and adjusting levels.
How to output color bars and a 1-kHz reference tone for calibration.
How to insert shot marks as subsidiary data for important scenes.
Function to review the last recorded clip on the screen.
Methods for deleting recorded clips, either the last clip or all clips.
How to customize the functions assigned to the camcorder's four assignable buttons.
Guides on setting up and performing time-lapse recording.
Instructions for setting up and performing frame-by-frame recording.
Guides on setting up and performing slow and quick motion recording.
How to use Freeze Mix to align images for sequential recording.
Guides on creating complex picture effects by registering and transitioning camera settings.
Guides on starting or ending recordings with fade-in or fade-out effects.
How to customize, store, and recall picture quality settings.
Guides on deleting the last recorded clip or all clips from a memory card.
How to store and retrieve camcorder settings as a setup file.
Guides on turning the camcorder to Media mode and starting clip playback.
Describes the display of recorded clips as thumbnails for selection.
How to pause, resume, and perform high-speed playback of clips.
Overview of the different clip operation menus available in Media mode.
How to view detailed information about a selected clip, including format and timecode.
Step-by-step guide for copying clips between cards and deleting clips from a card.
How to display the EXPAND CLIP screen to divide clips into blocks.
How to add or delete shot marks in Pause mode or on EXPAND CLIP/SHOT MARK screens.
Step-by-step guide to dividing a clip into two at a selected frame.
Overview of the camcorder's status screens and how to activate and switch them.
Displays camera-specific settings like white balance, gain, and picture profile status.
Shows audio signal information, including input levels, wind filter, and output settings.
Displays video format, output settings, assigned buttons, and remote status.
Displays battery charge levels, memory card status, and available recording time.
Introduces setup menus, their icons, and hierarchical structure.
Explains fundamental operations for navigating and changing settings within the setup menus.
Step-by-step guide on how to navigate and select menu items and settings.
How to select values, confirm settings, enter characters, and exit the menu system.
Details settings for Gain, Shutter, EX Slow Shutter, Shot Transition, MF Assist, and Color Bar Type.
Details settings for Shot Transition, Flicker Reduce, and Zoom Speed.
Details settings for Interval Rec, Frame Rec, S&Q Motion, Rec Review, and Fader functions.
Details settings for TLCS, AGC, Auto Shutter, Shockless White, White Switch, ATW Speed, and Wide Conversion.
Details settings for Audio Input, AGC Link, Wind Filter, EXT CH Select, Audio Output, Alarm Level, and Beep.
Details settings for YPbPr/SDI Out, Video Out, Setup, Down Converter, and 24P System.
Details settings for LCD and EVF adjustments, including color, contrast, brightness, and markers.
Details Display On/Off settings for various on-screen indicators.
Details settings for Timecode, Users Bit, TC Format, All Reset, Camera Data, and Time Zone.
Covers Clock Set, Language, and Assign Button settings.
Covers Tally, Hours Meter, IR Remote, Battery, Direct Menu, and i.LINK I/O settings.
Covers Trigger Mode, Country, Video Format, Clip, and Format Media settings.
How to connect external monitors for display and status information.
Details the SDI OUT and COMPONENT OUT connectors for video output.
How to control and edit recorded clips on a computer using SxS memory cards.
Instructions for using a computer's ExpressCard slot to access SxS memory cards.
Steps for connecting the camcorder or reader/writer to a computer via USB.
How to connect external devices using the i.LINK interface for HDV compatibility.
Steps to output the camcorder's video stream to an HDV recorder.
How to record HDV streams input via the i.LINK connector onto SxS memory cards.
Explanation of the digital serial interface and its capabilities.
Information on data transfer speeds and operating the camcorder with i.LINK devices.
Crucial guidelines for safe use, storage, and maintenance of the camcorder.
Advice on handling, storing, and protecting the camcorder from damage and environmental factors.
Information on the backup battery, its service life, and replacement procedure.
Details output formats and limitations for COMPONENT OUT, SDI OUT, and A/V OUT connectors.
Step-by-step guide for replacing the camcorder's backup battery.
Addresses symptoms, causes, and remedies for power, recording, and playback problems.
Addresses problems related to external device connections, particularly i.LINK.
Lists camcorder errors that stop operation and their causes/measures.
Details warning messages, their causes, and recommended actions.
Lists further warning messages related to media, battery, and external signals.
Provides general technical details including power, temperature, and recording formats.
Details specifications for the lens, pickup device, filters, sensitivity, and shutter.
Details specifications for microphones, speaker, LCD monitor, and viewfinder.
Lists specifications for all input/output connectors and optional accessories.
Provides physical dimensions and important notes on camcorder usage.
To Next Page
