Sony PMW-EX30 User Manual (English)

Other manuals for Sony PMW-EX30

Operating Instructions111 pages

Quick Start Guide8 pages

Questions and Answers:

S
Sheila Rivas PhDAug 27, 2025
What to do if Sony Camcorder recording does not start?
- R
  Richard HendersonAug 27, 2025
  If the SxS memory card is full, replace it with one having sufficient space. If the SxS memory card needs restoration, restore the memory card. If the video format of the input signal does not match with the video format set on this unit, set the unit to the same video format as that of the input signal. If the SxS memory card is write-protected, release the write protection, or replace the card with a non-protected SxS memory card.
T
Tony WrightSep 12, 2025
What to do if an unexpected error occurred with Sony Measuring Instruments?
- W
  Whitney GriffinSep 12, 2025
  If an unexpected error occurs, turn off the power of the PMW-EX30 and repeat the procedure from the beginning.
M
Marc LoweAug 27, 2025
What does alarm message Voltage Low mean on Sony PMW-EX30?
- L
  Lacey GrayAug 27, 2025
  If the DC IN voltage has become low (stage 1), check the power supply.
R
Roger ClarkAug 27, 2025
Why does the IR remote commander not work with my Sony Camcorder?
- S
  Sharon HoganAug 28, 2025
  If remote control operation is disabled, enable remote control operation. If the battery of the IR remote commander is exhausted, replace the battery with a new one.
A
Amy LeeAug 28, 2025
What does alarm message Insufficient Voltage mean on Sony PMW-EX30?
- M
  Matthew StewartAug 28, 2025
  If the DC IN voltage is too low (stage 2), connect another power source.
M
melissa01Sep 13, 2025
What to do if Sony DVR says 'Media Full'?
- M
  Mariah JacksonSep 13, 2025
  If your Sony DVR displays 'Media Full', it means there is no space left on the SxS memory card. Replace it with another card.
R
rmartinSep 9, 2025
Why can't I freely set the initial time data value on my Sony DVR?
- M
  Mrs. Amy StevensSep 9, 2025
  If you cannot freely set the initial time data value on your Sony DVR, it may be because Regen mode or Ext regen mode is selected. Set 'Mode' in 'Timecode' of the TC/UB SET menu to 'Preset'.
J
Jacob PhillipsSep 6, 2025
What does 'Insufficient Voltage' mean on my Sony DVR?
- T
  Tammy JohnsonSep 7, 2025
  The 'Insufficient Voltage' message on your Sony DVR means the DC IN voltage is too low (stage 2). Connect another power source.
J
James ReedAug 29, 2025
What does alarm message Copy Protected Input Cannot Record mean on Sony Camcorder?
- J
  Janet DavisAug 29, 2025
  If the external signal input via the i.LINK connection cannot be recorded, as the stream is copy-protected, check the input signal.
S
Seth ValdezAug 29, 2025
What does alarm message Media Error Cannot Record to Media(A) a) Media Error mean on Sony Camcorder?
- D
  Dr. Carlos HinesAug 30, 2025
  If recording cannot be done, as the memory card is defective, as playback may be possible, it is recommended to replace it with another card after copying the clips, as required.