Sony PS-242 - Page 5

c). Lay the leads of the coils as shown in Fig. D
and fix the leads in the slot between the
portions marked by *in Fig. E.
3. The motor coils are composed of two pairs.
a). Mount the coils on the motor frame so that
the boss of the coil is placed in the hole of
the
frame
as
illustrated
in
Fig.
C.
4.
Insert
the
motor
shaft
assembly
slowly
in
the
b).Push
the
coils
in
the
direction
of
arrow
and
motor
bearing
so
that
the
motor
shaft
is
not
tighten the
screws.
attracted by
strong magnetic field
strength.
motor frame
Fig. C
we,
one pair ne one pair
Fig. D
PS-242
a a i By