To Next PageTo Next Page
Need help?Do you have a question about the Sony PS-212A and is the answer not in the manual?
General| Speed | 33 1/3, 45 RPM |
|---|---|
| Drive Method | Belt drive |
| Tonearm Type | Static balance type |
| Effective Length | 216.5 mm |
| Overhang | 16.5 mm |
| Cartridge Type | Moving Magnet (MM) |
| Platter | Aluminum Die-Cast |
| Cartridge Weight Range | 4 - 10g |
| Output Level | 2.5 mV |
| Frequency Response | 20 Hz to 20 kHz |
| Type | Manual Turntable |
Covers power requirements, consumption, and physical dimensions.
Details platter, motor, drive system, speeds, pitch control, and wow/flutter.
Outlines tonearm S/N ratio, type, length, overhang, and tracking error.
Highlights critical components for safe operation and replacement guidelines.
Details specifications for VL-33G (AEP, UK) and VL-14GS (E) cartridges.
Information on identifying the turntable model via its specification label.
Provides a block diagram illustrating the PS-212A's internal circuitry.
General guidance, cautions, and specific steps for component removal.
Instructions for removing the bottom board and installing cords.
Procedures for removing the tonearm and its lifter mechanism.
Steps involved in removing the turntable motor assembly.
Guides for installing a cartridge and connecting its lead wires.
Procedures for mechanical adjustments and speed detecting head output level.
Procedures for electrical adjustments like turntable speed.
Adjustments for motor amplifier offset and Hall device gain.
Shows the physical placement of components on circuit boards for different models.
Detailed electronic schematic of the turntable's circuitry.
Diagrams showing exploded parts of the turntable, tonearm, and motor.
Comprehensive list of electrical parts, packing materials, and accessories.
Lists and defines various hardware components used in the turntable.
