To Next PageTo Next Page
Need help?Do you have a question about the Sony PS-Q7 and is the answer not in the manual?
Motor and Drive System| motor type | Linear torque BSL (brushless and slotless) |
|---|---|
| drive system | Direct drive |
| control system | Magnedisc servo control system |
Turntable Performance| speed | 33 1/3 rpm, 45 rpm |
|---|---|
| wow and flutter | 0.08% (WRMS) |
| signal-to-noise ratio | 68 dB (DIN-B) |
Tonearm and Cartridge| tonearm type | Dynamic balanced, low mass type |
|---|---|
| cartridge type | Moving magnet type |
| tracking force | 29 |
Amplifier and Outputs| output type | PHONO OUT, Stereo minijack |
|---|---|
| headphone output | Stereo minijack |
| output level | -60 dB to -23 dB (at 8 ohms load) |
Power| power requirements type 1 | 220V ac |
|---|---|
| power requirements type 2 | 240V ac |
| power requirements type 3 | 110 - 120 or 220 ~ 240 V ac, adjustable |
| power frequency | 50/60 Hz |
| power consumption | 5 W |
Weight and Dimensions| platter diameter | 7.8 cm |
|---|---|
| dimensions | 215 x 235 x 58 mm |
| weight | 2.5 kg |
| shipping weight | 3.2 kg |
Safety precautions to prevent fire or shock hazards and avoid electrical shock.
Overview of the PS-Q7's compact design and built-in amplifier features.
Information on selecting the correct power voltage for the unit.
Ensuring correct operating voltage and handling precautions for safety.
Recommendations for placing the turntable to avoid hum, noise, and vibration.
Guidance on preserving original packaging for transport and storage.
Instructions for connecting the PS-Q7 to an amplifier using the PHONO OUT jack.
Instructions for connecting the PS-Q7 to a radio cassette recorder via LINE IN or AUX.
Instructions for connecting headphones to the PS-Q7's front panel jack.
Proper methods for cleaning the stylus with a soft brush or fluid cleaner.
Guidelines for cleaning the cabinet and dust cover using mild detergents.
Common causes for poor audio quality and their solutions.
Troubleshooting steps for missing audio in one channel.
Diagnosing issues with audio not playing through headphones.
Addressing problems like skipping, skating, or tonearm not advancing.
Identifying and fixing a persistent low-frequency hum.
Resolving issues related to rumble or low-frequency noise.
