Sony PS-2700 - User Manual

GENERAL
Power Requirement:
Power Consumption:
Dimensions:
SPECIFICATIONS
110, 120, 220 or 240 V ac, 50/60 Hz (E, AEP mode!)
120V ac, GOHz (US and Canadian model)
OW (E model)
12W (US, Canadian model)
18W (AEP model)
455 (w) x 160 (h) x 370 (d) mm
18 (w) x6 34h) x 14% (d) inches
Weight: Approx. 8kg, 17 Ib 10o0z (net)
Approx. 10.5kg, 23 Ib 2 oz (with shipping carton)
TURNTABLE
Platter:
30cm
(12
inches),
diecasting
aluminum
alloy
Drive System: _ belt drive
Speeds: 3314, 45 rpm
Wow and Flutter:
S/N Ratio:
+0.08% (DIN 45507, weighted)
Less than 0.06% (NAB, weighted rms)
Greater than 63dB (DIN 45539, B-curve weighted)
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTS
IDENTIFIED
BY
SHADING
ON
THE
SCHEMATIC
DIAGRAMS
AND
IN
THE
PARTS
LIST
ARE
CRITICAL
TO
SAFE
OPERATION.
REPLACE
THESE
COMPONENTS
WITH
SONY
PARTS
WHOSE
PART
NUMBERS
APPEAR
AS
SHOWN
IN
THIS
MANUAL
OR
IN
SUPPLEMENTS
PUBLISHED
BY
SONY.
TONEARM
Type: Statically balanced, universal
Arm Length: 300mm (11 inches), overall
216.5mm (8 % inches), pivot-to-stylus
Overhang: 16.5mm (*%, inches)
Tracking Error: +3°, _1°
Tracking-force Adjustment
Range: O-—3g
Shell Weight: 7.59
Cartridge Weight Range: 4-— 10g
CARTRIDGE (VL-32G) (Canadian, E, AEP mode!)
Moving magnet type
4mV at 1kHz, 5cm/s
50k ohms
Tracking Force: 2g
Stylus: Conical 0.5 mit diamond (ND-134G)
Weight: 5.59
SON
Y.
SERVICE
MANUAL
Type:
Output Voltage:
Load Impedance:
@

Sony PS-2700 Specifications

General

Speed	33 1/3, 45 RPM
Drive Method	Belt Drive
Motor	DC Servo Motor
Tonearm Type	Static Balanced
Cartridge Type	MM (Moving Magnet)
Platter	Aluminum Die-Cast
Platter Diameter	300 mm
Platter Material	Aluminum
Tonearm Overhang	15 mm
Weight	6.5kg
Type	Manual
Frequency Response	20Hz to 20kHz