9
Rear
OUTPUT SELECT switch (page 13)
Switch to the appropriate output format of the
device you are using when an audio device,
such as a stereo system or an amplifier, is
connected.
GAIN SELECT switch
When playing, adjust the difference of the
volume of the vinyl records. If the audio track
was recorded on the vinyl record at a quiet
volume, set this to HIGH to play at the
appropriate volume. If the audio track was
recorded on the vinyl record at a loud volume,
the sound may become distorted if you play
the vinyl record with this set to HIGH. Change
the settings to be appropriate for the vinyl
record.
Volume adjustment is effective for audio
output when the OUTPUT SELECT switch is set
to LINE, the playback volume on BLUETOOTH
connections, and the recording volume on the
computer. It is ineffective for audio output
when the OUTPUT SELECT switch is set to
PHONO.
USB port (Type B) (page 19)
Use this port to connect a computer for
recording.
DC IN 12V jack
Power
ON/ STANDBY button
(page 19)
Turn on/off your turntable.
If playback does not start, even when you
press the START button, check that the power
is set to
ON.
Note on carrying this product
When you carry this product, make sure that you
firmly hold the bottom of the product as
illustrated below. Inappropriate holding may
cause you to drop the product, resulting in
malfunctions or injuries.
To Next Page
Loading...
Need help?
General
