Sony PVM-1341 - Dynamic Convergence Adjustment; Dynamic Convergence Adjustment (Screen Edges)

_I
® VMC (Vertical Misconvergence) correction and motion of the
Electron Beam with the BMC (6-poles) magnet.
VM*) ~B)
C<D C=D
C>D C=D
C ijRCEOA
O • OG
D G D
B OB
cri~cc~
otge°Ce
purity magnet
BMC (6-poles) magnet
V.STAT.
(2) Horizontal and Vertical Dynamic Convergence
Adjustment at the Environs of the Screen (Dynamic
Convergence Adjustment)
I. When there is misconvergence at the sides of screen, adjust for best
convergence as follows by moving the deflection yoke.
0-0-0
RGB
0--0-01---------
B GR
2. Loosen deflection yoke screw. Remove deflection yoke spacers.
Move the deflection yoke for best convergence. Tighten the
deflection yoke screw. Install three deflection yoke spacers.
-.---------; 0-0-0
BGR
C,.-0.0
A GB