35
Port Screen
Chapter 4 Web Menu
• Timedata & TM2: Timer counter and TM2
• Timedata & UB: Timer counter and user bits
• Timedata & Status: Timer counter and operating status
• Timedata & Audio: Timer counter and audio level
Background
Sets the character information background.
• Outline: White characters with black outlines
• Translucent: White characters on a gray transparent
background
• without BG: White characters with no background
•with BG
: White characters on a black background
Sub Status
Sets additional information displayed with the character
information.
•Off
: Displays no additional information.
• File Name: Displays the file name.
Warning Display
Sets whether to display a flashing warning message on the
second line of character information when [Character
Info.] is set to an item other than “Timedata Only.”
•Off
•On
Audio Meter
Audio Meter On/Off
Selects whether to display the audio meter in the monitor
signal.
•Off
•On
Position
Sets the display position of the audio meter.
• Upper Left
• Upper Right
•Left
•Right
•Lower Left
• Lower Right
Translucency
Sets the translucency of the audio meter display.
•Off
: Non-translucent display.
• Half-translucent: Displays the audio meter at 50%
translucency so that the video signal behind the audio
meter is visible.
Channel Setting
Sets the audio channels to display in the audio meter.
• L - R: General term indicating individual mixing of L
(odd-numbered channels) and R (even-numbered
channels).
•
CH01 - CH02
• CH03 - CH04
• CH05 - CH06
• CH07 - CH08
• CH09 - CH10
• CH11 - CH12
• CH13 - CH14
• CH15 - CH16
• CH01 - CH04
• CH05 - CH08
• CH09 - CH12
• CH13 - CH16
• CH01 - CH06
• CH01 - CH08
• CH09 - CH16
• CH01 - CH16
Character & Audio Meter on SDI-9 Monitor
Selects whether to display superimposed character
information, such as the time code, and audio meter on the
output from the SDI-9 connector.
When set to “Off,” text information display can be enabled
only on the SDI-10 connector, and no text information is
displayed on the SDI-9 connector.
•Off
•On
META Data Output
Sets the lines on which to output uncompressed metadata.
Fixed Line
When enabled, uncompressed metadata is output on the
lines set by the following options. When disabled,
metadata is output according to the line number
information recorded in clip data.
META Line 1
•9H
to 16H
• 18H to 20H (up to 25H for 720p, up to 41H for 3G-SDI
Level A)
META Line 2
•9H to 16H
• 18H to 19H
to 20H (up to 25H for 720p, up to 41H for
3G-SDI Level A)
META Line 3
•9H to 16H
• 18H to 20H
(up to 25H for 720p, up to 41H for 3G-SDI
Level A)
Video
Port Configuration
Selects the video format of each port from the matrix.
SDI Sync Phase
Sets the sync phase of the video signal output on the SDI
connector.
To Next Page
