Sony RDH-GTK37iP User Manual

13
GB
Getting Started
Note for iPod nano model users
Do not install the system vertically when using
iPod nano models with this system. iPod nano
models cannot be secured with the holding arm
because of their height. Install the system
horizontally.
Note on carrying the system
Do not carry the system with the iPod/iPhone
connected. Otherwise, the iPod/iPhone may fall
and be damaged. Sony cannot accept
responsibility for any damage caused by
inappropriate usage.
Notes
• When using commercially available iPod/
iPhone cases, the connected iPod/iPhone may
not be recognized by the system. If this
happens, remove the case from the iPod/
iPhone and reconnect it to the Terminal for
Apple Device.
• When using a vertically installed system,
make sure that the connected iPod/iPhone
remains upright, not tilted.
Connect the iPod/iPhone to the port
using USB cable supplied with your iPod/
iPhone.
Setting the clock
You cannot set the clock in Power Saving
Mode.
1 Press "/1 to turn on the system.
2 Press TIMER MENU.
If “PLAY SET” appears in the display
panel, press / repeatedly to
select “CLOCK”, then press .
3 Press / repeatedly to set the
hour, then press .
4 Press / repeatedly to set the
minutes, then press .
When connecting to the
port
iPod/iPhone
(not supplied)
USB cable
(not supplied)

Sony RDH-GTK37iP Specifications

General

Impedance	6 Ω
RMS rated power	420 W
Audio output channels	2.0 channels
Bluetooth	Yes
Headphone connectivity	-
Supported radio bands	AM, FM
Audio input	1
Power consumption (standby)	0.5 W
Power consumption (typical)	85 W
Product color	Black
Woofer diameter	200 mm
Tweeter diameter	66 mm

Weight and Dimensions

Depth	38.5 mm
Width	76.9 mm
Height	32.3 mm
Weight	14000 g
Package depth	44.9 mm
Package width	83.9 mm
Package height	41.6 mm
Package weight	17000 g