11
Hookups and Settings
Hookups and Settings
Hooking Up the Recorder
Follow steps 1 to 5 to hook up the recorder, and step 6 to make the initial settings for the recorder
(page 20). Do not connect the mains lead (the power cord) until you reach “Step 4: Connecting the Mains
Lead (Power Cord)” (page 17).
b Notes
• See “Specifications” (page 86) for a list of supplied accessories.
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this recorder to a TV that does not have a SCART or video input jack.
• Be sure to disconnect the mains lead (the power cord) of each component before connecting.
To Next Page
Loading...
Need help?
General
