Sony RM-E700 - Page 5

The Video Equipment Used with This Unit
To use this unit, you need a video player and a video
recorder. You can use only the following video equipment
with this unit.
Player
Sony video equipment (video
camera recorder, video cassette
recorder) with either CONTROL L
jack, REMOTE jack or LANC @
jack (© or :
Recorder
Sony video equipment (video
camera recorder, video cassette
recorder) with the jack of either
CONTROL L, REMOTE, LANC @
(© or @) or control $ input.
Or, a video equipment (video
camera recorder, video cassette
recorder) having the infrared remote
control system. Some models do not
work with the RM-E700.
TV or monitor
O00 |S S eos OND
Soc | oe
* About the @ (LANC) mark
@ (LANC) stands for Local Application Control Bus System.
The @ (LANC) jack is used for controlling the tape transport
of video equipment and peripherals connected to it.
This jack has the same function as the jacks indicated as
CONTROLL or REMOTE.
RM-E700
WHEN YOUR RECORDER IS DESIGNED BASED ONT HE
SECAM COLOR SYSTEM, THE OPTIONAL PAL-SECiM
TRANSCODER IS NECESSARY TO CONNECT THE FM-
E700 AND THE RECORDER.