What to do if my Sony RM-VL600T cannot control the volume?
If your Sony Remote Control isn't controlling the volume, ensure you've pressed the correct Component Select button and selected the desired component. If you've assigned another component to the TV or AMP button, volume control will be limited to those components. Weak batteries can also be the reason, so try replacing them with new ones.
How to fix Component Select buttons constantly flashing on Sony RM-VL600T?
If the Component Select buttons on your Sony Remote Control flash at a constant interval when you press a button, it indicates that learning has not succeeded. To fix this, see “For accurate Learning” and try the Learning procedure again.
What to do if Sony RM-VL600T Remote Control won't operate component after setting code?
If your Sony Remote Control cannot operate a component even after setting the component code numbers, it might be because the component codes cannot be set. Refer to the supplied “Component code numbers” and try setting the component codes again.
Why does my Sony Remote Control fail to learn remote control signals?
If the Sony Remote Commander fails to learn the remote control signals, it could be because a selected Component Select button or another button to be set has remote control signals programmed by the Learning function. Clear the “learned” signals or select another button which has no “learned” signals, and try setting again. Another possible reason is that the Hold function is on. Unlock the Hold function to resolve this.
Why is my Sony RM-VL600T not operating components?
If your Sony Remote Control isn't operating components, first ensure you're within 10 meters (32.8 ft) of the component and have a clear line of sight. Power on the components. Select the correct Component Select button, ensuring the desired component is selected. Verify the component has infrared remote capability. Check if you've assigned a different component to the button, and confirm the component code. If connected to an audio system, set up the Commander as described in “Controlling the Volume of Visual Components Connected to an Audio System”. Also, check if you've assigned another component on the TV or AMP button, which restricts volume control. Weak batteries can also cause this, so replace them. Set the component code correctly, trying all listed codes. If buttons still don't f...
General| Device Type | Universal Remote Control |
|---|---|
| Connectivity Technology | Infrared |
| Supported Devices | TV, DVD, VCR, Cable, Satellite, Audio |
| Number of Devices Controlled | 6 |
| Learning Function | Yes |
| Macro Function | Yes |
| Backlight | No |
| Power Source | 2 x AA batteries |
| Type | Learning remote control |
| Brand Compatibility | Compatible with most brands |
| Display | LCD |
To Next Page
