To Next PageTo Next Page
Need help?Do you have a question about the Sony RMT-D250P and is the answer not in the manual?
General| Type | Remote Control |
|---|---|
| Compatible Brand | Sony |
| Infrared Control | Yes |
| Compatible Devices | DVD Recorders |
| Battery Type | 2 x AA batteries |
Provides critical safety warnings regarding the laser exit and the use of optical instruments to prevent eye hazard.
Highlights components marked with a symbol, critical for safe operation, requiring specific replacement parts.
Outlines essential safety checks to perform after service before releasing the unit to the customer.
Describes common HDD failure symptoms and how to access the HDD recognition status for diagnosis.
Details the front panel display output and conditions for identifying HDD status during diagnosis.
Provides a flowchart for diagnosing and resolving the E01 error, typically indicating an unrecognized HDD.
Provides a flowchart for resolving the E02 display error, often related to system data errors or HDD issues.
Guides on diagnosing playback freezing issues for VIDEO, MP3, or JPG files, referring to HDD access flow.
Details the steps for performing a factory check, including AC power cycle and final power button press.
Explains the procedure to start and terminate the HDD Self Test (SMART Test) for diagnostic purposes.
Explains how to interpret the results of HDD diagnosis tests and determine appropriate actions, like replacement.
Details the steps for performing a Performance Check, a reading test across all HDD sectors to identify read errors.
Presents the overall block diagram for specific regional models, showing main board interconnections.
Provides the overall block diagram for additional regional models, detailing board interconnections.
Provides a high-level schematic showing the main board interconnections and signal paths.
Shows the schematic for the AV-133 board's IT controller and IR receiver section.
Details the schematic for the AV-133 board's power and fan control circuitry.
Presents the schematic for the AV-133 board's video and audio signal processing.
Shows the schematic for the AV-133 board's EURO interface and related functions.
Details the schematic for the AV-133 board's tuner section, including IC functions and signal paths.
Details the pin functions for the IT controller and IR receiver on the AV-134 board, including control and interface signals.
Shows the schematic for the AV-134 board's power and fan control circuitry.
Presents the schematic diagram for the AV-134 board's video and audio signal processing.
Details the pin functions for the IT Control IC (IC101) on the AV-133/134 boards, covering pins 1-50.
Outlines crucial precautions for handling HDDs, including sensitivity to shock, vibration, and temperature.
Lists examples of dangerous handling for the product with HDD mounted and for HDD repair parts.
Provides rules for safe handling of HDDs, including anti-static measures and avoiding physical shock.
Details the LD degradation judgment process for CDs and DVDs, including conditions for updating values.
Provides diagnostic steps for common DV input problems like no picture, no sound, or recording failures.
Guides on performing aging mode for DVD-RW/+RW/-RAM discs, including initialization and recording/playback cycles.
Details the aging mode operations for DVD-R/+R discs, including tray open/close and recording/playback loops.
Explains the aging mode for HDD, cautioning that all recorded data will be deleted during the process.
