EasyManua.ls Logo

Sony RMT-V266A User Manual

Sony RMT-V266A
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SLV-AX10/AX20/N50/N60/N70/N80/
LX4/LX5/LX6S/LX7S/LX8S
RMT-V266A/V266B/V292/V292A/V293/V294
US Model
SLV-AX10/AX20/N50/N60/N70/N80
Canadian Model
SLV-N50/N60/N70/N80
Mexican Model
SLV-LX4/LX5/LX6S(MX)/
LX7S(MX)/LX8S(MX)
Chilean Model
SLV-LX5(CL,CS)/LX7S(CL,CS)/
LX8S(CS)
Panama Model
Venezuelan Model
SLV-LX5(PA,PC,VZ)/LX7S(PA,PC,VZ)
SERVICE MANUAL
VIDEO CASSETTE RECORDER
MICROFILM
S MECHANISM
Refer to the SERVICE MANUAL of VHS
MECHANICAL ADJUSTMENT
for
MECHANICAL ADJUSTMENTS. (9-921-647-11)
System
Format
VHS NTSC standard
Video recording system
Rotary head helical scanning FM system
Video heads
Double azimuth four heads
Video signal
NTSC color, EIA standards
Tape speed
SP: 33.35 mm/s (1
inches/s)
EP: 11.11 mm/s (
inches/s)
LP: 16.67 mm/s (
inches/s),
playback only
Maximum recording/playback time
8 hr
9 hrs. in EP mode (with T-180 tape)
s. in EP mode (with T-160 tape)
Fast-forward and rewind time
Appr
(SLV-AX10/AX20/N50/N60/N70/N80)
(SLV-AX10/AX20/N50/N60/LX4/LX5/LX6S/LX7S)
(SLV-AX10/AX20/N50/N60/N70/N80/LX4(MX)/
LX5(MX,PA,PC,VZ)/LX6S/LX7S(MX,PA,PC,VZ)/
LX8S(MX))
(SLV-AX10/AX20/N50/N60/N70/N80/LX6S/
LX7S/LX8S)
(SLV-AX10/AX20/N50/N60/N70/N80/LX6S/
LX7S/LX8S)
(SLV-LX4/LX5)
(SLV-LX4/LX5/LX6S/LX7S/LX8S)
(SLV-N70/N80/LX8S)
(SLV-N70/N80/LX8S)
(SLV-LX5(CL,CS)/LX7S(CL,CS)/LX8S(CS))
(SLV-AX10/AX20/N50/N60/N70/N80)
ox. 3 min. (with T-120 tape)
Tuner section
Channel coverage
VHF 2 to 13
UHF 14 to 69
CATV A-8 to A-1, A to W, W+1 to W+84
Antenna
75-ohm antenna terminal for VHF/UHF
Inputs and outputs
LINE-1 IN and -2 IN
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
A
AUDIO IN, phono jack (1 each)
(SLV-LX4/LX5)
AUDIO OUT, phono jack (1)
UDIO IN, phono jacks (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO OUT, phono jacks (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
S-LINK (CONTROL S IN) (SLV-N80 only)
Mini jack (1)
CABLE BOX CONTROL (CONTROL S OUT) (SLV-
N80 only)
Stereo mini jack (plug in power) (1)
Timer section
Clock
Quartz locked
Timer indication
12-hour cycle
Timer setting
8 programs (max.)
Power back-up
Built-in self-charging capacitor
Back-up duration: up to 1 hour at a time
General
Power requirements
12
110 V AC – 240 V AC, 50/60 Hz
0 V AC, 60 Hz
Power consumption
24 W
(SLV-LX4/LX5/LX6S/LX7S/LX8S)
18 W
Operating temperature
5°C to 40°C (41°F to 104°F)
Storage temperature
–20°C to 60°C (–4°F to 140°F)
Dimensions
App
Approx. 355 × 96 × 285 mm (w/h/d)
rox. 430 × 97 × 290.5 mm (w/h/d)
(
(Approx. 14 ×
Approx. 17 × 3 × 11 inches) including
projecting parts and controls
Mass
Approx. 4.1 kg (9 lb 1 oz)
(SLV-AX10/AX20/N50/N60/LX4/LX5/LX6S/LX7S)
Approx. 3.6 kg (7 lb 15 oz)
Supplied accessories
Remote commander (1)
Size AA (R6) batteries (2)
75-ohm coaxial cable with F-type connectors (1)
Audio/video cable (3-phono, 1-mini to 3-phono, 1-mini)
(1) (SLV-N80 only)
Audio/video cable (3-phono to 3-phono) (1) (SLV-N70
only)
Design and specifications are subject to change without
notice.
E
NERGY
S
TAR
®
is a U.S. registered mark.
As an
E
NERGY
S
TAR
®
Partner, Sony Corporation has
determined that this product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
3
8
7
16
11
16
7
8
1
2
3 × 11 inches) including
7
8
1
4
SPECIFICATIONS
Photo : SLV-N80
RMT-V292
HiFi model : SLV-AX10/AX20/N50/N60/N70/N80/LX6S/LX7S/LX8S
Mono model: SLV-LX4/LX5

Table of Contents

Other manuals for Sony RMT-V266A

Question and Answer IconNeed help?

Do you have a question about the Sony RMT-V266A and is the answer not in the manual?

Sony RMT-V266A Specifications

General IconGeneral
Device TypeRemote Control
BrandSony
ModelRMT-V266A
Compatible DevicesVCR
InfraredYes

Summary

VCR Specifications Overview

System, Tuner, and I/O Details

Covers VCR system, tuner, inputs, and outputs.

Interface and Timer Specifications

Details S-LINK, CABLE BOX CONTROL, Timer, and General specs.

Safety Procedures and Warnings

Safety Check-out Guidelines

Post-repair safety verification steps for customer release.

AC Leakage Testing Method

Procedure for measuring AC leakage current from metal parts.

General VCR Information

Getting Started Guide

Initial setup, unpacking, and basic VCR configuration steps.

Basic and Advanced Operations

Instructions for playing, recording, searching, and picture adjustments.

VCR Technical Information

Disassembly Procedures

Steps for disassembling the VCR, including case, boards, and panels.

System Block Diagrams

Diagrams illustrating the VCR's functional blocks and signal paths.

Interface and Schematic Diagrams

IC Pin Functions and Interfaces

Details on IC pin functions and interface connections.

Circuit Diagrams and PWB Layouts

Schematic diagrams and printed wiring board layouts.

VCR Adjustments

Electrical Adjustment Preparation

Required equipment and connection setup for electrical adjustments.

Power Supply Voltage Checks

Methods for checking various power supply voltages.

Repair Parts Information

Exploded Views of VCR Components

Visual breakdown of VCR parts for identification.

Electrical Parts List Details

List of electronic components and their specifications for repair.

Related product manuals