9
Turning the Speaker Systems
On and Off
Press POWER on the remote or the front speaker (left).
The front speaker ON/READY indicator lights green.
Power turns on and off automatically
(Auto power on/off function)
You do not need to turn the speaker system on every
time you use it . Three minutes after the sound source
goes off (when you turn off the TV, or the currrently
playing video/laserdisc ends), the speakers turn off
automatically and the ON/READY indicator turns red.
The speakers turn themselves back on the next time
you turn on the TV or start playback from the VCR.
z If you press POWER when the speakers are on
The speakers switch to the standby mode (the ON/
READY indicator goes off), and the auto power on/off
function takes no effect. In this case, press POWER once
more, and wait until the ON/READY indicator changes
to red.
Note
If you are using this speaker system connected to an HCD-
VA550, depending on the mode of operation the auto power
on/off function may not operate.
Adjusting the contrast of the display
window
You can dim the display, or turn it off, according to
your preference.
Press DIMMER, on the remote, a few times until the
display mode you desire appears.
The display returns to full brightness temporarily
when you press one of the buttons on the remote.
Getting Started
To Next Page
Loading...
