Installation
GB
10
Pole or Column Installation
Use a Pole Mount Adapter Bracket to mount the unit on a pole or column.
Pole Mount Adapter Brackets, metal banding, cable raceways, couplings, nuts, audio signal
cables, and power cables are not supplied. Customers should procure them as necessary.
1 Use metal banding to secure the Pole Mount Adapter Bracket onto the pole
or column.
2 Remove the cover at the rear of the speaker.
•The cover screws are screwed tightly to the speaker and may be difficult to remove.
•The cover is attached to the speaker with a coiled cord.
Note
Notes
Pole Mount Adapter Bracket
Metal banding
Cover
To Next Page
