19
GB
Installation
B Use the supplied safety wire rope mount screw (M4 × 16) to secure the rope.
Use only the supplied screw to secure the safety wire rope. Using a screw other than the
one supplied may not provide sufficient support.
8 Adjust the angle of the speaker.
After adjusting the angle, tighten the adjustment bolts on the left and right sides of the
speaker to lock the angle.
Caution
Safety wire rope mount screw
(M4
× 16)
Safety wire rope (supplied)
Safety wire rope holes
Tighten the left and right adjustment bolts to lock.
To Next Page
