Need help?Do you have a question about the Sony SDM-HS73 and is the answer not in the manual?
General| Screen Size | 17 inches |
|---|---|
| Resolution | 1280 x 1024 |
| Panel Type | TFT LCD |
| Aspect Ratio | 5:4 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 500:1 |
| Response Time | 16 ms |
| Viewing Angles | 160° horizontal, 160° vertical |
| Power Consumption | 45 W |
| Input Connectors | VGA, DVI-D |
Guidelines and warnings for safely connecting the monitor's power cord.
Recommendations for proper monitor placement, avoiding extreme conditions and interference.
Precautions for handling the LCD panel to prevent damage, scratches, or pressure marks.
Information on normal display phenomena like pixel defects and temporary image retention.
Instructions for safely cleaning the monitor exterior and screen.
How to safely transport the monitor, recommending original packaging.
Guidance on environmentally responsible disposal of the monitor and its components.
Step-by-step guide for connecting the monitor to IBM PC/AT and Macintosh computers.
Instructions for connecting the monitor to a power outlet.
Steps for managing cables and closing the monitor's rear cover.
Procedure for powering on the computer and monitor after setup.
How to adjust the monitor's tilt angle for optimal viewing.
How to adjust the monitor's brightness level through different modes (High, Medium, Low, User).
Guide on how to access and navigate the on-screen menu using the buttons.
Controls the brightness of the backlight for better visibility.
Fine-tunes the contrast level of the image displayed on the screen.
Controls the black level or brightness of the image.
Manually adjusts image sharpness (phase/width) and position (H/V).
Centering the image horizontally and vertically using utility software.
Selects preset color temperatures or customizes color settings.
Adjusts the color tone of the screen to match the original image.
Allows repositioning the on-screen menu if it obstructs the image.
Changes the language used for menus and messages on the display.
Restores all adjustment settings to their original factory default values.
Prevents accidental changes to settings by locking the monitor controls.
Features and modes for reducing monitor power consumption, compatible with DPMS.
Automatically adjusts image signal for optimal display quality and sharpness.
Explains common messages displayed on the screen and their meanings.
Addresses issues related to cable connections, computer compatibility, and out-of-range signals.
Solves problems where the screen shows no image, no signal, or the power indicator is off.
Rectifies problems like blurry images, ghosting, dark display, moiré patterns, color issues, and white balance.
Resolves problems with image centering, size, and unresponsive monitor buttons.
Guide on how to initiate and interpret the monitor's self-diagnostic test for troubleshooting.
Steps to take if the indicator is green and the image is missing during self-diagnosis.
Steps for issues indicated by a blinking orange power light during self-diagnosis.
To Next Page
