SERVICE MANUAL
SPECIFICATIONS
SDM-X52
TFT LCD Color Computer Display
US Model
Canadian Model
AEP Model
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 15.0 inch
Input signal format RGB operating frequency*
Horizontal: 28 – 61 kHz
Vertical: 56 – 75 Hz
Resolution Horizontal: Max.1024 dots
Vertical: Max.768 lines
Input signal levels Analog RGB video signal
0.7 Vp-p, 75 Ω, positive
SYNC signal
TTL level, 2.2 kΩ ,
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75Ω, negative
(Sync on green)
Digital RGB (DVI) signal: TMDS
(Single link)
Power requirements 100 – 240 V, 50 – 60 Hz,
Max. 0.7A
Power consumption Max. 28 W
Operating temperature 5 – 35
°C
Dimensions (width/height/depth)
Display (upright):
Approx. 392 × 358 × 199 mm
(15
1
/
2
× 14
1
/
8
× 7
7
/
8
inches)
(with stand)
Approx. 392 × 299 × 73 mm
(15
1
/
2
× 11
7
/
8
× 2
7
/
8
inches)
(without stand)
Mass Approx. 4.8 kg (10 lb 9 oz) (with
stand)
Approx. 3.5 kg (7 lb 11 oz)
(without stand)
Plug & Play DDC2B
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
To Next Page
Need help?
General
