Sony SDM-X72 User Manual (English)

To Next Page

SERVICE MANUAL

SPECIFICATIONS

SDM-X72

TFT LCD Color Computer Display

US Model

Canadian Model

AEP Model

Chinese Model

LCD panel Panel type: a-Si TFT Active Matrix

Picture size: 17.0 inch

Input signal format RGB operating frequency*

Horizontal: 28 – 92 kHz

Vertical: 56 – 85 Hz

Resolution Horizontal: Max.1280 dots

Vertical: Max.1024 lines

Input signal levels Analog RGB video signal

0.7 Vp-p, 75 Ω , positive

SYNC signal

TTL level, 2.2 kΩ ,

positive or negative

(Separate horizontal and vertical,

or composite sync)

0.3 Vp-p, 75Ω , n

gative

(Sync on green)

Digital RGB (DVI) signal: TMDS

(Single link)

Power requirements 100 – 240 V, 50 – 60 Hz,

Max. A

0.9

Power consumption

Max. 40 W

Operating temperature 5 – 35

Dimensions (width/height/depth)

Display (upright):

Approx. 438 × 410 × 227 mm

(17

× 16

× 9 inches)

(with stand)

Approx. 438 × 356 × 84 mm

(17

× 14

×3

inches)

(without stand)

Mass

Approx. 7.1 kg (15 lb 10 oz) (with

stand)

Approx. 5.3 kg (11 lb 11 oz)

(without stand)

Plug & Play DDC2B

* Recommended horizontal and vertical timing condition

• Horizontal sync width duty should be more than 4.8% of total

horizontal time or 0.8 µs, whichever is larger.

• Horizontal blanking width should be more than 2.5 µsec.

• Vertical blanking width should be more than 450 µsec.

Design and specifications are subject to change without notice.

Need help?

Do you have a question about the Sony SDM-X72 and is the answer not in the manual?

Sony SDM-X72 Specifications

General

Screen Size	17 inches
Maximum Resolution	1280 x 1024
Panel Type	TFT LCD
Brightness	250 cd/m²
Contrast Ratio	450:1
Response Time	25 ms
Input Connectors	DVI-D, VGA
Pixel Pitch	0.264 mm
Horizontal Viewing Angle	160°
Vertical Viewing Angle	140°
Aspect Ratio	5:4
Input Signal	Analog, Digital
Connector	DVI, 15-pin D-sub
Viewing Angles	160° horizontal / 140° vertical