model name [SHAKE-6D]
[4-462-817-11(2)] GB
32
GB
filename[D:\NORM'S JOB\SONY HA\SO130043\SHAKE-6D (PMRF
01)\4462817112_GB\060CDP.fm]
masterpage:Left
You can transfer sound from an analog
audio source (other than DVD/CD, USB
or Bluetooth function) to a USB device.
Use the buttons on the unit to perform this
operation.
1 Connect a transferable USB
device to the B port (page 31).
2 Press TUNER/BAND or AUDIO IN
repeatedly to select the source
you want to transfer.
3 Press REC TO USB B.
“PUSH ENTER” appears in the
display panel.
4 Press ENTER.
The transfer starts when “DON’T
REMOVE” appears in the display
panel.
5 Start playback the source.
To stop transferring
Press x.
To create a new MP3 file
Press REC TO USB B during Analog
Transfer.
“NEW TRACK” appears in the display
panel.
A new MP3 is also created automatically
after approximately 1 hour of transfer.
Notes
• When a new MP3 file is created, transfer is
disabled for the time being.
• If you press REC TO USB B again after a few
seconds, a new MP3 file can be created.
1 Press USB repeatedly until
“USB A” or “USB B” lights up in
the display panel.
2 When playback is stopped, hold
down SHIFT, then press
OPTIONS.
3 Press / repeatedly to select
“USB ERASE”, then press .
The Folder List is displayed on the TV
screen.
4 Press / to select a folder,
then press .
5 Press / to select the audio
file you want to erase, then
press .
Select [ALL TRACKS] to select all
audio files in the folder.
“FOLDER ERASE” or “TRACK
ERASE” and “PUSH ENTER”
appears in the display panel.
To cancel, press x.
6 Press .
“COMPLETE” appears in the display
panel.
Note
A folder that contains non-MP3/WMA/AAC
format audio files or sub folders cannot be
erased.
Transferring analog audio
(Analog Transfer)
Erasing audio files or folders
on the USB device
To Next Page
Loading...
