Sony SHAKE-7 - Page 36

model name [SHAKE-7]
[4-451-239-11(1)] GB
36
GB
filename[D:\NORM'S JOB\SONY HA\SO120050\SHAKE-
7\4451239111_GB\080ADD.fm]
masterpage:Left
Bluetooth section
Communication system
Bluetooth Standard version 3.0 + EDR
(Enhanced Data Rate)
Output
Bluetooth Standard Power Class 2
Maximum communication range
Line of sight approx. 10 m
1)
Frequency band
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread
Spectrum)
Compatible Bluetooth profiles
2)
A2DP (Advanced Audio Distribution
Profile)
AVRCP 1.3 (Audio Video Remote
Control Profile)
Supported codecs
SBC (Sub Band Codec)
AAC (Advanced Audio Coding)
1)
The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna’s performance, operating system,
software application, etc.
2)
Bluetooth standard profiles indicate the
purpose of Bluetooth communication between
devices.
Speakers
Speaker system
4-way, Bass reflex
Speaker unit
Woofers: 200 mm, cone type
Tweeters: 25 mm, horn type
Mid speakers: 100 mm, cone type
Subwoofers: 380 mm, cone type
Rated impedance
Tweeters/woofers: 4 ohms
Mid speakers: 5 ohms
Subwoofers: 4 ohms
Dimensions (w/h/d) (Approx.)
510 mm × 750 mm × 446 mm
Mass (Approx.)
32 kg
Quantity: 2 pieces
General
Power requirements
Mexican model:
AC 120 V – 240 V, 60 Hz
Other models:
AC 120 V – 240 V, 50/60 Hz
Power consumption
420 W
Dimensions (w/h/d) (excl. speakers)
(Approx.)
500 mm × 220 mm × 380 mm
Mass (excl. speakers) (Approx.)
8.4 kg
Supplied accessories
Remote control (1)
R6 (Size AA) batteries (2)
FM lead/AM loop antenna (1)
Design and specifications are subject to
change without notice.