model name [SHAKE-7]
[4-451-239-11(1)] GB
25
GB
filename[D:\NORM'S JOB\SONY HA\SO120050\SHAKE-
7\4451239111_GB\07OTH.fm]
masterpage:Right
Other Operations
Changing the display
Press DISPLAY repeatedly while
the system is turned off.
Demonstration
The display changes and the indicator
flashes even when the system is turned
off.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
operate.
Clock
The clock display automatically turns to
Power Saving Mode after a few seconds.
1 Press OPTIONS on the unit.
2 Press / repeatedly to select
“SPECTRUM”, then press .
3 Press / repeatedly to select
the spectrum pattern you want,
then press .
To exit the OPTIONS menu, press
OPTIONS on the unit.
Press DISPLAY repeatedly when
the system is turned on.
You can view the information as follows:
• For AUDIO CD:
– The elapsed playing time and
remaining playing time during
playback.
– The total playing time when playback
is stopped.
• For audio files:
– The elapsed playing time, file name
and folder name.
– The title, artist and album information.
Note
The elapsed playing time of an audio file
encoded using a VBR (variable bit rate) is not
displayed correctly.
Using optional
equipment
1
Press VOLUME – repeatedly
until “VOLUME MIN” appears in
the display panel.
2 Connect an optional equipment
(page 8).
3 Press FUNCTION repeatedly to
select the function which
corresponds to the connected
equipment.
4 Start playing the connected
equipment.
5 Press VOLUME + repeatedly to
adjust the volume.
Changing the display mode
Changing the spectrum
pattern of the display panel
Viewing information in the
display panel
To Next Page
Loading...
