Sony SHAKE-X3D - Changing the Color System (Except for Latin American, European, and Russian Models); Setting the Clock; Changing the Display Mode

18
GB
Changing the color
system
(Except for Latin American,
European, and Russian models)
Set the color system to PAL or NTSC
depending on the color system of your
TV.
Each time you perform the procedure
below, the color system changes as
follows:
NTSC  PAL
Use the buttons on the unit to perform
this operation.
1 Press  to turn on the system.
2 Press FUNCTION, then turn the
VOLUME/MULTI CONTROL knob to
select “DVD/CD”, then press
ENTER.
3 Hold down DJ OFF and FOOTBALL
for more than 3 seconds.
“COLOR NTSC” or “COLOR PAL”
appears in the display panel.
Setting the clock
You cannot set the clock in Power
Saving Mode.
1 Press  to turn on the system.
2 Hold down SHIFT, then press
TIMER MENU.
“PLAY SET” appears in the display
panel. Press / repeatedly to
select “CLOCK SET”, then press .
3 Press / repeatedly to set the
hour, then press .
4 Press / repeatedly to set the
minutes, then press .
Changing the display
mode
Press DISPLAY repeatedly when the
system is turned off.
Demonstration
The demonstration is turned on.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
operate.
Clock
The clock is displayed for a few
seconds, then enters the Power Saving
Mode.