Sony SHAKE-X3D - Disc;USB Playback; Basic playback

19
GB
Disc/USB Playback
Basic playback
1 Press FUNCTION +/– repeatedly to
select “DVD/CD”, “USB 1”, or
“USB 2”.
You can also use the buttons on the
unit. Press FUNCTION, then turn the
VOLUME/MULTI CONTROL knob to
select “DVD/CD”, “USB 1”, or
“USB 2”, then press ENTER.
2 For DVD/CD function:
Press  on the unit to open the disc
tray and load a disc with the label
facing up.
Press  on the unit again to close
the disc tray.
Do not forcibly push the disc tray to
close it as this may cause a
malfunction.
For USB function:
Connect a USB device to the
(USB) 1 or (USB) 2 port.
You can use your iPhone/iPod with
this system via BLUETOOTH
connection only.
You can use a USB adaptor (not
supplied) to connect the USB device
to the unit if the USB device cannot
be plugged into the (USB) port.
3 ( only)
Press MEDIA MODE repeatedly to
select the media ([MUSIC]/
[VIDEO]/[PHOTO]) you want.
4 Press  to start playback.
To select USB memory
You can select which memory to use as
a playback source or transfer
destination if the USB device has an
internal memory and a memory card.
Make sure to select a memory before
starting playback or transfer.
1 Press OPTIONS.
2 Press / repeatedly to select
“MEM SEL”, then press .
3 Press / repeatedly to select the
memory you want, then press .
To exit the options menu, press
OPTIONS.
Disc/USB Playback
When you
play back an
8 cm disc such
as a CD single,
place it on the
inner circle of
the tray
USB device
Notes
To Press
Stop playback 
Pause playback 
Resume
playback or
return to normal
playback

Cancel the
resume point
 twice
Select a track,
file, chapter or
scene
 or  during
playback.
Or, hold down SHIFT, then
press the numeric buttons,
and then press .
(Operation might be
prohibited by disc or USB
device)