Sony SHAKE-X3D - Page 57

57
GB
Additional Information
Speakers
SS-SHAKEX7
Speaker system
3-way, Sound Pressure Horn
Speaker unit
Woofers: 150 mm, cone type
Tweeters: 25 mm, horn type
Subwoofers: 380 mm, cone type
Rated impedance
8 ohms
Dimensions (w/h/d) (Approx.)
510 mm × 773 mm × 458 mm
Mass (Approx.)
30.5 kg
SS-SHAKEX3
Speaker system
2-way, Sound Pressure Horn
Speaker unit
Tweeters: 25 mm, horn type
Subwoofers: 250 mm, cone type
Rated impedance
4 ohms
Dimensions (w/h/d) (Approx.)
368 mm × 585 mm × 358 mm
Mass (Approx.)
14.5 kg
General
Power requirements
AC 120V – 240V, 50/60Hz
Power consumption
SHAKE-X7D: 375 W
SHAKE-X3D: 220 W
Power consumption (at the Power Saving
mode)
0.5 W (When “BT STBY” is set to
“OFF”)
4 W (When “BT STBY” is set to “ON”)
Dimensions (w/h/d) (excl. speakers)
(Approx.)
455 mm × 165 mm × 330 mm
Mass (excl. speakers) (Approx.)
SHAKE-X7D: 6.3 kg
SHAKE-X3D: 5.9 kg
Design and specifications are subject to
change without notice.