148
Selecting the drive mode
You can shoot using the SHUTTER and 2SEC (the shutter is released after
2 seconds) buttons on the RMT-DSLR1 Wireless Remote Commander
(sold separately). Also, refer to the operating instructions supplied with the
Wireless Remote Commander.
Note
• The RMT-DSLR1 Wireless Remote Commander (sold separately) cannot be used
for movie recording.
Remote Cdr.
1 on the control button t
(Remote Cdr.)
2 Focus on the subject, point the transmitter of the Wireless
Remote Commander to the remote sensor, and shoot the
image.
To Next Page
Loading...
