How to change the language for the sound track on my Sony DVD VCR Combo?
If you can't change the language for the sound track, try using the DVD’s menu instead of the direct selection button on the remote. Note that multilingual tracks may not be recorded on the DVD, or the DVD may prohibit changing the language.
Why is the sound volume low on my Sony DVD VCR Combo?
If the sound volume is low, especially on some DVDs, try setting “Audio DRC” to “Wide Range”.
Why doesn't the playback picture appear on the TV screen from my Sony DVD VCR Combo?
Ensure the TV is set to the channel for the VCR. The signal from the VCR will not be output when you make the connection using COMPONENT VIDEO OUT jacks.
How to improve the picture quality on my Sony DVD VCR Combo?
If the picture isn't clear, try adjusting the tracking with the TRACKING +/- buttons. The video heads may be dirty or need to be replaced.
Why does playback stop automatically on my Sony DVD VCR Combo?
If playback stops automatically, it may be due to the disc having an auto pause signal. The player will stop playback at these signals.
Why is there no picture on my Sony DVD VCR Combo?
If you're experiencing a blank screen or noisy picture, the connecting cords might be damaged. Try reconnecting them securely. Also, ensure the correct input selector is chosen on your TV, the disc isn't dirty or flawed, and that 'Progressive' is set to 'Off'. Check the settings and connections to your TV as well.
Why is the timer not working on my Sony DVD VCR Combo?
If the timer isn't working, ensure the clock is set, a tape has been inserted, and the safety tab hasn't been removed. Also, make sure the tape isn't at its end, a program has been set for timer recording, your timer settings are past the current time, and the cable box or satellite receiver is turned on. Note that the clock stops if the DVD-VCR is disconnected from the wall outlet for more than one minute.
How to fix a Sony DVD VCR Combo remote that is not working?
If the remote isn't working, ensure you're pointing it at the remote sensor on the DVD-VCR. Replace all the batteries with new ones if they're weak. Also, make sure the TV / DVD·VIDEO switch is set correctly, and select the correct mode (DVD or VIDEO) using the SELECT DVD/VIDEO button.
Power| power requirements | AC120V, 60 Hz |
|---|---|
| power consumption | 20 Watts |
Ports & interfaces| coaxial audio digital output(s) | 1 (Rear) |
|---|---|
| RCA audio input(s) | 2 (1 Front, 1 Rear) |
| RCA audio output(s) | 1 (Rear) |
| composite video input(s) | 2 (1 Front, 1 Rear) |
| component video (Y/Pb/Pr) output(s) | 1 (Rear) |
Weight and Dimensions| weight | 7.94 lbs (3.6KG) |
|---|---|
| measurements | 16.9" x 3.4" x 11.3" (430 x 85 x 287 mm) |
To Next Page
