Overview
Basic Configuration by the Administrator
10
Basic Configuration by
the Administrator
You can monitor the camera image by logging in with
the initial conditions set for this network camera. You
can also set various functions according to the installing
position, network conditions or purpose of the camera.
We recommend you configure the following items
before monitoring images from the camera.
Setting contents Setting menu
Set the format of the image sent from the camera. Video codec Tab (page 32)
Select the White balance mode according to the installation position. White balance (page 30)
Select the brightness of the image sent from the camera. Exposure (page 29)
Brightness (page 30)
Select the quality of the image sent from the camera. Video codec Tab (page 32)
Select the view size of the image. View size (page 14)
Select whether the audio from the external input is sent or not. Audio Tab (page 33)
Synchronize the date and time of the camera with those of the computer. Date & time Tab (page 24)
Make the setting for sending the monitor image attached to an e-mail. Mail Transfer Tab (page 64)
Set the user access right for the camera. User Tab (page 45)
Use Wi-Fi to make the setting for connecting the camera (SNC-CX600W) Wi-Fi Tab (page 41)
To Next Page
Loading...
Need help?
General
