Sony SNC-VB642D User Manual

Administrating the Camera
Setting the Security — Security Menu
50
3 Click Next.
4 Select Automatically selects the certificate store
based on the type of certificate and click Next.
Completing the Certificate Import Wizard
appears.
5 Check the contents, then click Finish.
The CA certificate will be installed.
To remove an installed CA
certificate
1 In Internet Explorer, click in the order Tools,
Internet options, Content tab and Certificates.
The Certificates dialog appears.
2 Select the certificate you want to remove.
The CA certificate is usually stored in Trusted
Root Certification Authorities.
3 Click Remove.
Do you want to delete the certificate appears to
confirm.
4 Click Yes .
The certificate will be removed.
There may be a case that a certificate cannot be
removed by the steps above due to the type of
certificate. Check the installation condition and
remove it following the steps below.
Note
You need to log in as Administrator to perform these
steps.
1 Open Run... of the Windows menu, then enter mmc
and click OK.
2 Select File in the Console 1 window and Add/
Remove Snap-in... (when Windows XP
Professional is used).
Add/Remove Snap-in... dialog appears.
3 Select Certificates from the list, then click Add.
Certificate Snap-in is displayed.
4 Select Computer account as the certificate
administrated in this Snap-in, then click Next.

Sony SNC-VB642D Specifications

General

Camera Type	Box
Digital Zoom	12x
IR Illuminator	Yes
Shutter Speed	1/1 s to 1/10000 s
Gain Control	Auto/Manual
Video Compression	H.264, MPEG-4, JPEG
Max Resolution	1920 x 1080
Maximum Frame Rate	60 fps
Resolution	1920 x 1080
Network Interface	RJ-45 (10BASE-T/100BASE-TX)
Image Sensor	1/2.8" Exmor CMOS
Lens Type	Varifocal lens
Aperture	F1.4
Angle of View (Horizontal)	105.3° to 35.6°
Minimum Illumination (B/W)	0 lx
IR Distance	30 m
White Balance	Auto, Indoor, Outdoor, Manual
Wide Dynamic Range	View-DR
Audio Compression	AAC, G.726, G.711
Audio Input/Output	Line input, Line output
Ethernet	10BASE-T/100BASE-TX
Protocols	IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, FTP, SMTP, DHCP, DNS, NTP, RTP/RTCP, RTSP, SNMP
Power Consumption	Max.
Power Requirements	PoE (IEEE802.3af compliant), DC 12 V
Day/Night	Yes